Tips to Test a Button Battery8176557
Button battery is recognized as a small battery which is generally utilized to energy the little electronic devices. This button battery gets its name simply because it is round and resembles buttons or coins. Numerous individuals are actually not truly familiar with this quite new type of battery. When you are having electronic device which stops working, it might be caused by a easy matter of the dead or dying button battery. At this time, this post is going to give you some tips of a testing technique for the button battery that will help you to verify its situation.
As the initial step, you ought to remove the battery from your device and then you require to inspect it for figuring out the battery voltage. The voltage is generally marked on the battery. It is known that most of the button batteries are produced between 1.35 and 3 volts.
As the second step, you need to set the multimeter for displaying the voltage on the DCV scale.
The third step that you should do is to determine the positive side of your battery by finding side with a "+" that marked on it. Following that, you need to touch the positive probe of multimeter (red) anyplace on this side.
The fourth step is to touch negative probe of multimeter (black) to the unfavorable side of your battery. The negative side is of course in the opposite side of the good side.
The last step is to take a note of the voltage that is displayed on the multimeter. If you discover that the voltage is about 10 percent much less than the marked voltage on battery, you require to replace it. For instance, the 1.5 battery should show the voltage of at least 1.35 volts, whilst the three volts battery must show the voltage of at least 2.7 volts.
