Tips to Test a Button Battery2814103
Button battery is known as a small battery which is generally utilized to power the small electronic devices. This button battery gets its name because it is round and resembles buttons or coins. Numerous people are actually not really familiar with this quite new kind of battery. When you are having electronic device which stops operating, it might be brought on by a easy matter of the dead or dying button battery. At this time, this article is going to give you some suggestions of a testing method for the button battery that will help you to verify its condition.
As the first step, you ought to eliminate the battery from your device and then you require to inspect it for determining the battery voltage. The voltage is generally marked on the battery. It is recognized that most of the button batteries are produced in between 1.35 and three volts.
As the second step, you need to set the multimeter for displaying the voltage on the DCV scale.
The third step that you should do is to figure out the positive side of your battery by finding side with a "+" that marked on it. Following that, you require to touch the good probe of multimeter (red) anywhere on this side.
The fourth step is to touch unfavorable probe of multimeter (black) to the unfavorable side of your battery. The negative side is of course in the opposite side of the good side.
The last step is to take a note of the voltage that is displayed on the multimeter. If you discover that the voltage is about ten percent less than the marked voltage on battery, you require to replace it. For instance, the 1.5 battery must show the voltage of at least 1.35 volts, while the three volts battery must show the voltage of at least two.7 volts.
