Tips to Test a Button Battery4858606
Button battery is known as a little battery which is commonly utilized to energy the small electronic devices. This button battery gets its name simply because it is round and resembles buttons or coins. Many individuals are really not truly familiar with this quite new kind of battery. When you are having electronic device which stops working, it might be brought on by a simple matter of the dead or dying button battery. At this time, this post is going to give you some tips of a testing technique for the button battery that will help you to verify its condition.
As the initial step, you ought to remove the battery from your device and then you need to inspect it for figuring out the battery voltage. The voltage is usually marked on the battery. It is known that most of the button batteries are produced between 1.35 and 3 volts.
As the second step, you require to set the multimeter for displaying the voltage on the DCV scale.
The third step that you should do is to determine the good side of your battery by discovering side with a "+" that marked on it. Following that, you require to touch the good probe of multimeter (red) anywhere on this side.
The fourth step is to touch unfavorable probe of multimeter (black) to the unfavorable side of your battery. The unfavorable side is of course in the opposite side of the positive side.
The last step is to take a note of the voltage that is displayed on the multimeter. If you find that the voltage is about ten percent less than the marked voltage on battery, you require to replace it. For instance, the 1.5 battery should show the voltage of at least 1.35 volts, while the 3 volts battery must show the voltage of at least two.7 volts.
