Tips to Test a Button Battery4218796
Button battery is recognized as a small battery which is commonly used to power the small electronic devices. This button battery gets its name simply because it is round and resembles buttons or coins. Many individuals are really not truly familiar with this fairly new kind of battery. When you are having electronic device which stops working, it might be caused by a simple matter of the dead or dying button battery. At this time, this article is going to give you some suggestions of a testing technique for the button battery that will help you to verify its condition.
As the initial step, you ought to remove the battery from your device and then you require to inspect it for determining the battery voltage. The voltage is generally marked on the battery. It is known that most of the button batteries are produced between 1.35 and three volts.
As the second step, you need to set the multimeter for displaying the voltage on the DCV scale.
The third step that you ought to do is to determine the good side of your battery by finding side with a "+" that marked on it. After that, you require to touch the positive probe of multimeter (red) anyplace on this side.
The fourth step is to touch unfavorable probe of multimeter (black) to the unfavorable side of your battery. The unfavorable side is of course in the opposite side of the good side.
The last step is to take a note of the voltage that is displayed on the multimeter. If you discover that the voltage is about 10 percent much less than the marked voltage on battery, you require to replace it. For instance, the 1.five battery must show the voltage of at least 1.35 volts, while the three volts battery must show the voltage of at least two.7 volts.
