Tips to Test a Button Battery714751
Button battery is known as a little battery which is generally used to energy the little electronic devices. This button battery gets its name because it is round and resembles buttons or coins. Numerous people are really not really familiar with this fairly new type of battery. When you are getting electronic device which stops working, it may be caused by a simple matter of the dead or dying button battery. At this time, this post is going to give you some suggestions of a testing method for the button battery that will help you to verify its condition.
As the first step, you should eliminate the battery from your device and then you require to inspect it for figuring out the battery voltage. The voltage is generally marked on the battery. It is recognized that most of the button batteries are made between 1.35 and 3 volts.
As the second step, you require to set the multimeter for displaying the voltage on the DCV scale.
The third step that you should do is to figure out the positive side of your battery by finding side with a "+" that marked on it. After that, you require to touch the positive probe of multimeter (red) anyplace on this side.
The fourth step is to touch negative probe of multimeter (black) to the unfavorable side of your battery. The negative side is of course in the opposite side of the good side.
The final step is to take a note of the voltage that is displayed on the multimeter. If you discover that the voltage is about ten percent less than the marked voltage on battery, you require to replace it. For instance, the 1.five battery should show the voltage of at least 1.35 volts, whilst the 3 volts battery should show the voltage of at least two.7 volts.
