Tips to Test a Button Battery8972764
Button battery is known as a small battery which is generally used to power the little electronic devices. This button battery gets its name because it is round and resembles buttons or coins. Numerous individuals are really not truly familiar with this quite new kind of battery. When you are getting electronic device which stops operating, it may be brought on by a easy matter of the dead or dying button battery. At this time, this article is going to give you some tips of a testing technique for the button battery that will assist you to verify its situation.
As the initial step, you ought to eliminate the battery from your device and then you require to inspect it for figuring out the battery voltage. The voltage is usually marked on the battery. It is recognized that most of the button batteries are made between 1.35 and three volts.
As the second step, you need to set the multimeter for displaying the voltage on the DCV scale.
The third step that you should do is to determine the positive side of your battery by discovering side with a "+" that marked on it. After that, you need to touch the positive probe of multimeter (red) anyplace on this side.
The fourth step is to touch negative probe of multimeter (black) to the unfavorable side of your battery. The negative side is of course in the opposite side of the positive side.
The last step is to take a note of the voltage that is displayed on the multimeter. If you find that the voltage is about ten percent much less than the marked voltage on battery, you require to replace it. For instance, the 1.5 battery must show the voltage of at least 1.35 volts, while the 3 volts battery should show the voltage of at least 2.7 volts.
